Analog Oscilloscope Toshiba CRT

T4-Analog-Oscilloscope-u-100MHz.bmp

ANALOG OSCILLOSCOPE (TOSHIBA CRT)

Model Number : GOTT-OS-620

Brand: GOTT

C/O: Malaysia

 

FEATURE

PRODUCT SPECIFICATION

CRT

  • Type 6-inch rectangular type with internal graticule 8 x 10 div (1div = 1cm)
  • Acceleration Voltage Approx.2KV (20MHz) / Approx. 12KV (40MHz)
  • Z-Axis Input Input Impedance : Approx. 47k ] Sensitivity : Above 5Vp-p Bandwidth : DC ~ 2MHz Max input voltage 30V (DC+AC peak, AC frequency < 1KHz)

VERTICAL SYSTEM

  • Sensitivity 5mV/div ~ 5V/div±3%, x5MAG±5%
  • Bandwidth DC-20MHz (x5MAG : DC ~ 7MHz) DC-40MHz (x5MAG : DC ~ 15MHz) DC-50MHz (x5MAG : DC ~ 15MHz)
  • AC Coupling Low limit frequency 10Hz (with reference to 100KHz, 8DIV, Frequency response with 3Db.)
  • Rise Time Approx. 1 7nS (x5MAG : Approx. 50nS) Approx. 8.75nS (x5MAG : Approx. 25nS) Approx. 7nS (x5MAG)
  • Input Impedance Approx. 1 M] / Approx 25pF
  • DC Balance Shift 5MmV ~ 5V/div : ±0.5div, 1mV~2V/div±2.0div
  • Input Coupling AC, DC, GND
  • Vertical Mode CH1, CH2, Dual, ADD, CH2 INV (Dual automatic switching ALT. and chop)

HORIZONTAL SYSTEM

  • Sweep Time 0.2mS ~ 0.5S/div 20step in 1-2-5 sequence
  • Sweep Time Accuracy ± 3%
  • Vernier Sweep Time Con < 1/2.5 of panel-indicated value
  • Sweep Magnification 10 times

TRIGGER

  • Trigger Mode AUTO, NORM, TV-V, TV-H
  • Trigger Source CH1, CH2, ALT, LINE, EXT.
  • Trigger Coupling AC
  • Trigger Slope “+” or “-“

X – Y OPERATION

  • Sensitivity 5mV ~ 5V/div±4%
  • X-axis Bandwidth DC ~ 500kHz
  • Phase Error 3° or less from DC ~ 50kHz

OUTPUT SIGNAL

  • Trigger Signal Output Voltage : approx. 20mV/div into 50Ω
  • Calibrator Output 1 kHz Square wave, 2Vp-p±2%

POWER SUPPPLY

  • AC 230V + 10% 50Hz

DIMENSION AND WEIGHT

  • 310(W) x 150(H) x 455(D) mm
  • 8kg

ACCESSORIES

  • User Manual x 1
  • Power Cord x 1
  • Test Lead x 2

Manuals :

  • All manuals are written in English
  • Model Answer
  • Teaching Manuals

General Terms :

  • Accessories will be provided where applicable.
  • Manual & Training will be provided where applicable.
  • Design & specifications are subject to change without notice.
  • We reserve the right to discontinue the manufacturing of any product