Hydraulic Actuator for Cyclic Loading

Hydraulic Actuator for Cyclic Loading

Actuator is a linear motion device, which gives a controlled motion either on a stress basis or a strain basis. It is a precision piece of equipment that follows the command from the wave generator through the servo valve. It
is an equal area ram and piston with a surface finish of 0.2 microns. End plates have metallic seals for side thrust. The servo valve is fixed to the actuator. These valves are high performance two-stage valves with a pressure
drop of @70 bars. Technical Specifications:-
Type: Double
Acting
Capacity: ±10kN
Stroke length: ± 50mm
Frequency range : 0.01Hz-10Hz
Displacement transducer: ±50mm
Operating Pressure : 100 kg/cm2
Servo Valve 2 stage : 20LPM
Note: Higher capacity Actuators up to ± 100kN can also be provided on request.