Compression Testing Machines with Digital Readout Unit
Load Frame | Load frame is steel welded fabricated. It is design to withstand a few million times of full cycles of loading without any sign of distortion or fatigue. These frames are light in weight. The base carries a fine finished hydraulic ram and the lower platen. The top plate has the spherical seating to take care of any irregularly of the specimen surface or slight misplacement of the specimen from the central position. |
Pumping Unit | Pumping unit is attached on the right hand side of the loading unit. It is a multi plunger pump submersed in the tank and is powered by 1.5 kW electric motor.
Power pack gives non-pulsating flow to the hydraulic ram. This ensures smooth loading of the specimen which can be seen by the movement of the load gauge/ digital display. the flow of the oil can be precisely controlled by the strain control knob located at a convenient height. With the proper check on the oil, the life of the pumping unit and the hydraulic ram is almost as long as, life of machine. Indication of load on digital display system, which is directly indicated, in respective engineering unit, the electronic display unit is totally microprocessor based with a built in RS232 serial port. It has indicator for load, peal load, and pace rate indicator. Rate of loading can be adjusted by control knob which can be effectively controlled by experienced operator during the course of testing by viewing the bar graph. |
Specification | Capacity:2000kn/3000kn
Max. Ram Travel (mm)- 50 Day Light Clearance (mm)- 340 Horizontal Clearance (mm)-350 Size of Platen (mm) -256 |